Loading Events

← Back to Events

Dolf Broekaart

+31(0)85-0498165|www.simuleon.com

July 2020

Abaqus Explicit: Advanced Topics Training Course

July 15 @ 09:00 - July 17 @ 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
EUR 1470,00

To register for this 3-day classroom training in the Netherlands, please fill in the form below. The course will continue at a minimum nr. of 3 persons. If the amount is less, Simuleon has the right to propose another month to have the training, or to suggest a company specific training instead. This training is meant for experienced Abaqus users. If you are a beginning Abaqus user, you might want to consider following any of the introduction courses. This is…

Find out more »

Online Webinar Training: Buckling, Post-Buckling and Collapse with Abaqus FEA

July 31 @ 11:30 - 12:00
Continual Learning Program - 10 Webinars per year for EUR 1175,00

July’s webinar will present the analysis types available in Abaqus, for evaluating the structural response under buckling, post buckling and collapse. Buckling is the sudden collapse of a structural member under axial compressive loading. The importance of accurately predicting buckling loads during design is paramount, since these loads are on most occasions lower than the ultimate compressive loads of the particular member. The non-linear character of this failure type, imposes a modelling and convergence challenge. Furthermore based on the physical…

Find out more »

August 2020

Abaqus CAE: Geometry Import and Meshing Training Course

August 13 @ 09:00 - August 14 @ 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
EUR 980,00

To register for this 2-day classroom training in the Netherlands, please fill in the form below. The course will continue at a minimum nr. of 3 persons. If the amount is less, Simuleon has the right to propose another month to have the training, or to suggest a company specific training instead. This training is meant for experienced Abaqus users. If you are a beginning Abaqus user, you might want to consider following any of the introduction courses. This is…

Find out more »

Hands-on Workshop: Introduction to XFlow CFD – August

August 28 @ 09:00 - 13:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
Free

The “Introduction to XFlow CFD” is a free event for anyone who has some experience of simulation and CFD, but would like to look at extending the scope of the work they do. This workshop is an ideal way to understand, what advanced CFD simulation, like SIMULIA XFlow CFD can offer. Find out how easy it actually is, to perform a real world CFD analysis. Starting with a lecture session covering the essential concepts of advanced Computational Fluid Dynamics (CFD) simulation, the…

Find out more »

September 2020

Introduction to Abaqus Training Course – September

September 9 @ 09:00 - September 11 @ 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
EUR 1470,00

To register for this 3-day classroom training in the Netherlands, please fill in the form below. The course will continue at a minimum nr. of 3 persons. If the amount is less, Simuleon has the right to propose another month to have the training, or to suggest a company specific training instead. If you are an expert Abaqus user, you might want to consider following any of the advanced courses. This is what our customers experienced: "Very good to learn…

Find out more »

Hands-on Workshop: Introduction to Abaqus FEA – September

September 25 @ 09:00 - 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
Free

The “Introduction to Non-Linear Analysis Workshop” is a free event for anyone who has some experience of simulation and FEA, but would like to look at extending the scope of the work they do. This workshop is an ideal way to understand what advanced simulation can offer and find out how easy it actually is to perform a real world non-linear analysis. Starting with a lecture session covering the essential concepts of advanced simulation, the course also gives the attendees the opportunity to…

Find out more »

Online Webinar Training: September

September 25 @ 11:30 - 12:00
Continual Learning Program - 10 Webinars per year for EUR 1175,00

This is a placeholder for one of the Continual Learning Program - Online Webinar Training. Every month different Abaqus topics will be covered and discussed. For who is this event? The "Online Webinar Training: September" webinar is a paid online training for existing customers. Other companies can sign up and receive a free webinar once. The costs for 10 Online Webinar Training Sessions during the year are EUR 1.175,00. The link for the online event will be sent just one…

Find out more »

October 2020

Modelling Rubber and viscoelasticity with Abaqus Training Course

October 15 @ 09:00 - October 16 @ 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
EUR 980,00

To register for this 2-day classroom training in the Netherlands, please fill in the form below. The course will continue at a minimum nr. of 3 persons. If the amount is less, Simuleon has the right to propose another month to have the training, or to suggest a company specific training instead. This training is meant for experienced Abaqus users. If you are a beginning Abaqus user, you might want to consider following any of the introduction courses. This is…

Find out more »

Hands-on Workshop: Introduction to Advanced Contact Analysis

October 30 @ 08:45 - 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
Free

The Introduction to Advanced Contact Workshop is a free event for anyone dealing with complex contact conditions, who has beginner or advanced experience in simulation and FEA, but would like to look at extending the scope of the work they do. This workshop is an ideal way to understand what advanced simulation with robust contactsolver can offer, and find out how easy it is to perform a real world non-linear analysis. In this unique event Simuleon will present their solutions based…

Find out more »

Online Webinar Training: October

October 30 @ 11:30 - 12:00
Continual Learning Program - 10 Webinars per year for EUR 1175,00

This is a placeholder for one of the Continual Learning Program - Online Webinar Training. Every month different Abaqus topics will be covered and discussed. For who is this event? The "Online Webinar Training: October" webinar is a paid online training for existing customers. Other companies can sign up and receive a free webinar once. The costs for 10 Online Webinar Training Sessions during the year are EUR 1.175,00. The link for the online event will be sent just one…

Find out more »

November 2020

Introduction to Fe-Safe Training Course

November 12 @ 09:00 - November 13 @ 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
EUR 980,00

To register for this 2-day classroom training in the Netherlands, please fill in the form below. The course will continue at a minimum nr. of 3 persons. If the amount is less, Simuleon has the right to propose another month to have the training, or to suggest a company specific training instead. This training is meant for users who want to get better predictability for their durability & fatigue related challenges for metal products. Basic Abaqus knowledge is preferred. If…

Find out more »

Hands-on Workshop: Introduction to Abaqus FEA – November

November 27 @ 09:00 - 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
Free

The “Introduction to Non-Linear Analysis Workshop” is a free event for anyone who has some experience of simulation and FEA, but would like to look at extending the scope of the work they do. This workshop is an ideal way to understand what advanced simulation can offer and find out how easy it actually is to perform a real world non-linear analysis. Starting with a lecture session covering the essential concepts of advanced simulation, the course also gives the attendees the opportunity to…

Find out more »

Online Webinar Training: November

November 27 @ 11:30 - 12:00
Continual Learning Program - 10 Webinars per year for EUR 1175,00

This is a placeholder for one of the Continual Learning Program - Online Webinar Training. Every month different Abaqus topics will be covered and discussed. For who is this event? The "Online Webinar Training: November" webinar is a paid online training for existing customers. Other companies can sign up and receive a free webinar once. The costs for 10 Online Webinar Training Sessions during the year are EUR 1.175,00. The link for the online event will be sent just one…

Find out more »

December 2020

Introduction to Abaqus Training Course – December

December 9 @ 09:00 - December 11 @ 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
EUR 1470,00

To register for this 3-day classroom training in the Netherlands, please fill in the form below. The course will continue at a minimum nr. of 3 persons. If the amount is less, Simuleon has the right to propose another month to have the training, or to suggest a company specific training instead. If you are an expert Abaqus user, you might want to consider following any of the advanced courses. This is what our customers experienced: "Very good to learn…

Find out more »

Hands-on Workshop: Introduction to Abaqus FEA – December

December 18 @ 09:00 - 17:00
Simuleon B.V., Pettelaarpark 84
's Hertogenbosch, 5216 PP Netherlands
+ Google Map
Free

The “Introduction to Non-Linear Analysis Workshop” is a free event for anyone who has some experience of simulation and FEA, but would like to look at extending the scope of the work they do. This workshop is an ideal way to understand what advanced simulation can offer and find out how easy it actually is to perform a real world non-linear analysis. Starting with a lecture session covering the essential concepts of advanced simulation, the course also gives the attendees the opportunity to…

Find out more »
+ Export Events